Can baby monitors be hacked? WiFi security and how to lock one down

This post contains affiliate links. If you buy through them, we may earn a small commission at no extra cost to you.Learn more.

Our answer, if you don’t read another word: yes, baby monitors can be hacked, and the ones at risk are the ones on your WiFi. A camera connected to the internet can, in principle, be reached from the internet, and research has shown many were badly protected. A non-WiFi monitor pairs its camera only with its own handset over a private radio link, so there is no route in from outside your home. If you need a WiFi monitor, it can be locked down well with an afternoon of settings, and the steps are below.

We own six video monitors. Four of them have no WiFi at all, one has WiFi that we have never switched on, and one is a WiFi monitor, so we have lived with both sides of this.

A note on scope. This page is about privacy and the security of a camera in your home. It is not about the baby’s safety, which no monitor provides. That subject belongs with the AAP and the CPSC.

How a baby monitor gets hacked

It helps to know how break-ins actually happen, because most of them are not clever.

A WiFi monitor is a small computer on your network with a camera, a microphone and often a speaker. It talks to an app on your phone, usually through the manufacturer’s servers. Every one of those pieces is a door: the camera itself, your router, your account with the manufacturer, and the company’s own systems.

The common ways in are dull ones. A default password that was never changed, or one that is the same on every unit of that model. A password reused from another account that has been leaked elsewhere. Firmware that has not been updated in years and has known holes in it. A router set to open ports to the internet automatically. Video sent without encryption.

These are not theoretical. In 2015 the security firm Rapid7 examined nine internet-connected baby monitors from eight manufacturers and found problems in every one. Eight of the nine scored an F on their scale and the other scored a D. The findings included hidden, hard-coded logins built into devices and video streams sent without encryption. You can read their summary of the research. Products have improved since then, but the same categories of mistake still turn up in cheap connected cameras of all kinds.

There have also been widely reported cases of strangers speaking to children through hacked cameras. The common thread in most of them is that the camera was reachable from the internet and the account behind it was not well protected.

Why a non-WiFi monitor is a different kind of risk

A non-WiFi monitor removes nearly every door on that list.

The camera pairs straight to its own handheld screen over a private radio link, usually listed as 2.4 GHz FHSS. FHSS stands for frequency-hopping spread spectrum, which means the signal jumps between channels in a pattern only the paired camera and handset share. There is no app, no account, no cloud server and no connection to your router. Nothing on the internet can find it, because it is not on the internet.

That does not make it untouchable. Anyone trying to intercept it would need to be close by, within radio range of your house, with equipment to do it, and with a reason to target your home in particular. The old analogue monitors of decades ago could be picked up by other receivers nearby. Modern digital frequency-hopping links are far harder to listen in on. Be wary of any box that promises hack-proof, though. That is a marketing word rather than a security standard.

So the difference comes down to who could even try. A WiFi monitor can be reached by anyone on the internet who finds a weakness. A non-WiFi monitor can only be approached by someone standing near your home. Those are very different numbers of people.

The trade is remote viewing. A non-WiFi monitor shows you the nursery from inside the house and nowhere else. If nobody needs to watch from outside, you lose nothing, and that is why most of our monitors are this kind. We rank them in the best non-WiFi baby monitors.

WiFi and non-WiFi monitors, compared on security
WiFi monitorNon-WiFi monitor
Reachable from the internetYes, by designNo
Account and password to protectYesNone
Firmware and app updates neededYes, ongoingRarely relevant
Depends on the maker's serversUsuallyNo
Who could try to intercept itAnyone online who finds a weaknessSomeone within radio range of your home
Watch from outside the houseYesNo

The monitors in our house, and how we run them

Four of ours never touch the internet because they cannot: the Infant Optics DXR-8 PRO, the HelloBaby HB6560, the Jeeber VB619 and the VTimes VT31. There is nothing to configure on any of them. You plug in both halves and they pair.

The VTech is the interesting one. It carries WiFi, a direct FHSS link and Bluetooth. The cameras talk to the parent unit over the direct link whether or not the monitor is ever joined to a network, so the WiFi only adds phone access. We have never connected it. It has run as a plain dedicated monitor since the day we set it up.

The VAVA is a WiFi monitor, so it is the one in the house that the checklist below applies to.

How to lock down a WiFi baby monitor

If you need a WiFi monitor, and plenty of families do, these are the steps that close the common doors. They follow the advice of the UK’s National Cyber Security Centre in its guide to smart cameras and the US Federal Trade Commission’s guide to securing connected devices.

Change the default password, and make it unique

If the camera or its app came with a default password, change it on day one. Use something long that you do not use anywhere else. Three random words strung together is the NCSC’s suggestion, and a password manager makes it painless. A reused password is one leak away from being someone else’s.

Turn on two-factor login

If the app offers two-step verification, switch it on. It means a stolen password alone is not enough to get into your account, because the login also needs a code from your phone.

Keep the firmware and the app updated

Updates fix security holes that have been found since the camera was made. Turn on automatic updates if the monitor offers them. If it does not, check the app’s settings for a firmware page once a month or so. A camera that has stopped receiving updates altogether is worth replacing.

Turn off what you do not use

If you only ever watch from inside the house, turn off remote access. The NCSC notes this may also switch off some alerts or smart home features, so decide which matters more. Do the same with cloud recording, sharing and any integrations you set up once and forgot about.

Check who has access

Most apps let you share the camera with other people. Look at the list now and then, and remove old phones, ex-babysitters and anyone who no longer needs it. The FTC suggests checking the access logs on internet cameras for unfamiliar addresses or odd times, if your app shows them.

Secure the router it lives on

Your monitor is only as safe as the network it is on. Change the router’s own admin password from the default. Use WPA2 or WPA3 encryption. Keep the router’s firmware updated. And consider turning off UPnP and port forwarding, which can open devices up to the internet without asking you. Both the NCSC and the FTC flag this. Some devices need those features to work, so test the monitor afterwards.

Buy from a maker that supports its products

Before you buy a WiFi monitor, look for a brand that tells you how long it will receive security updates and gives you a way to report problems. In the UK this is now the law: since 29 April 2024, connected consumer products sold there cannot ship with guessable default passwords, and makers have to publish a contact for reporting security issues and say how long updates will last. The NCSC explains it in their post on the new smart devices law. It is a useful test to apply wherever you live.

Signs a monitor may have been compromised

Most people will never see any of these, but they are worth knowing.

Sounds or voices from the camera that are not yours. A camera that pans or tilts when nobody touched the handset. Settings, names or passwords that have changed. Logins you do not recognise in the app’s history. A status light that comes on when nobody is watching.

If something looks wrong, unplug the camera from power first. Then change your router password, your monitor account password and the password of any account that shares it. Reset the camera to factory settings, update its firmware before reconnecting it, and contact the manufacturer. If the camera no longer receives updates, retire it.

Is a WiFi monitor still worth it?

For some families, yes. The ability to look in from outside the house is useful when a grandparent is babysitting, when one parent travels, or when you are at a neighbour’s for an hour. A WiFi monitor from a maker that ships updates, set up with the steps above, is a reasonable thing to own.

What we would push back on is buying WiFi by default. Many parents end up with an app and an account for a monitor they only ever watch from the next room. If that sounds like your house, a non-WiFi monitor gives you the same picture with nothing to secure. Our best baby monitor roundup covers both kinds, with our top pick on the non-WiFi side. If you want the full checklist of what else to look for, see how to choose a baby monitor.

The bottom line

Can baby monitors be hacked? WiFi monitors can, and the usual causes are default passwords, missing updates and routers left open. A non-WiFi monitor sidesteps the internet entirely, which is why four of our six are that kind and why our top pick is one of them. If you need remote viewing, buy a WiFi monitor from a maker that supports it, give it a unique password and two-factor login, keep it updated, and lock down the router it sits on. That covers the doors almost every reported break-in has walked through.

Frequently asked questions

Can baby monitors be hacked?

WiFi baby monitors can be, and it has happened. In 2015 the security firm Rapid7 tested nine internet-connected baby monitors and found serious flaws in every one, including hidden built-in logins and unencrypted video. Non-WiFi monitors are a different situation: the camera talks only to its own handset over a private radio link, so it cannot be reached over the internet at all. Someone would have to be within radio range, which is a much smaller and harder target.

Are non-WiFi baby monitors hack-proof?

No device is worth calling hack-proof, so be wary of any box that says so. What a non-WiFi monitor does is remove the internet from the picture. There is no account to break into, no app and no cloud server, and nothing reachable from outside your home. Anyone wanting to intercept it would need to be physically close, within radio range, and modern digital links that hop between frequencies are far harder to listen in on than the old analogue monitors were.

How do I secure my WiFi baby monitor?

Change any default password to a long unique one, turn on two-factor login for the app if it offers it, keep the camera's firmware and the app updated, and turn off remote viewing if you do not use it. Then secure the router it sits on: change the router's admin password, use WPA2 or WPA3 encryption, and consider turning off UPnP and port forwarding. The UK's NCSC and the US FTC both publish guidance along these lines.

How can I tell if my baby monitor has been hacked?

Warning signs people report include voices or sounds coming from the camera that are not yours, the camera moving on its own, settings or passwords changing, and logins you do not recognise in the app's history. The FTC suggests checking the access logs on internet cameras for unfamiliar addresses or odd times. If anything looks wrong, disconnect the camera from the network, reset it, change every related password and contact the manufacturer.

Does a monitor that works without WiFi but has a WiFi option carry the same risk?

Only once you connect it. Our VTech has WiFi and its own direct radio link between the cameras and the handset. We have never joined it to our network, so in practice it behaves like a non-WiFi monitor. If you do connect a hybrid like this to use the app, treat it as a WiFi monitor from that point and lock it down the same way.